We have 2 types of hinges you can choose from, either from our Standard range or Deluxe Soft-Close range. Your Hinges will dictate which glass panels you need to purchase.

Standard Hinges

⊕ Self-Closing Hinges
⊕ Made from Stainless Steel 316
⊕ Have a “Anti-Toe Hold” cone cap
⊕ Part of the “Master Hinge” brand
⊕ Weighted capacity of 25kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel

.

Soft-Close Hinges
Our Soft-Close hinge range are the safest and most reliable specially designed pool fence hinge in the industry that complies with stringent Australian Standards AS1926 and AS2820

⊕ 155 Series are compatible with our STD Glass Panels
⊕ 125 Series are compatible with our Soft-Close Glass Panels
⊕ Eliminates Slamming Glass Gates
⊕ Self-Closing pool fence compliant safety hinge
⊕ Adjustable closing speeds with European dampeners for a Soft-Close action
⊕ 155 Series come with a Polymer cone cap supplied for “Anti-Toe Hold”
⊕ Made from Stainless Steel 2205 (Higher rust & wear resistant than SS316)
⊕ Weighted capacity of 45kgs per pair
⊕ Able to suit wide range of applications:
— Glass Hinge Panel to Glass Gate Panel
— Square Post to Glass Gate Panel
— Wall to Glass Gate Panel

Hinge Gap (A)
⊕ STD Range = 10mm
⊕ Soft Close Range = 5mm

Latch Gap (B) Glass to Glass
⊕ 9mm

Latch Gap (C) Glass to Square Post/Wall
⊕ STD Range = 22mm
⊕ Soft Close Range = 8mm

STD Gap (D)
⊕ 38mm – 60mm

To be compliant to pool fencing requirements, Raked Panels (also known as Retaining Wall Panels) may be needed.

Our raked panels are higher at one side of the glass which enables step points or changes in height to be overcome. We have 1200mm Wide panels with 5 heights available.

The modular raked panels are a large cost savings versus custom made raked glass and also enable jobs to be completed immediately.

⊕ Our raked panels come standard with 1200mm height one end & 1200mm Width
⊕ The adjusted height options are: 1400, 1500, 1600, 1700, 1800mm
⊕ Each panel comes with a 400mm straight top on the high end
⊕ Grade ‘A’ 12mm thick clear toughened glass
⊕ 5mm radius corners
⊕ Compliant to AS/NZS2208
⊕ Examples of raked panel uses:

A) Overcome different levels along fence line

B) Overcome landscaping as a toe hold along fence line

C) Overcome stepping point issues around fence line

*Please take care to refer to relevant standards to ensure our raked panels are suitable for your needs as each installation situation / compliance requirement is unique.

Facemount Spigots

⊕ Friction facemount spigots
⊕ Slimline 45mm front profile
⊕ Duplex Stainless Steel 2205
⊕ Hidden Facemount Installation
⊕ 2x M12 fixing nuts included (Rod / Screws sold seperately)
⊕ Slotted fixing hole allows for easy fixing & adjustment
⊕ Earthing terminal included
⊕ Comes in 3 colours: Black, Satin, Polish

Base Plate Spigots

Double Friction Design: This patented design allows for faster installation and easier alignment of glass panels.
⊕ Duplex stainless steel 2205
⊕ Double friction design
⊕ Slimline 45mm front profile
⊕ Multiple base plate fixing points
⊕ Includes 22mm high domical cover

Tilt Spigots

Innovative face mount spigot featuring tilt adjustment for easy alignment of glass panels
⊕ Easy tilt adjustment
⊕ Duplex stainless steel 2205
⊕ Face-mount spigot, fix to vertical surface of concrete, timber/steel beams
⊕ 2 Part spigot for easy install:
(1) Rear Plate fixes to vertical surface
(2) Spigot attaches to rear plate with 2x M8 counter sunk screws
⊕ Timber/beam fixing – 2x fixing points in the rear plate for increased strength
⊕ Concrete fixing – 1x Sturdy M18 fixing point – Ideal for narrow slabs
⊕ Earthing terminal included

Top Mount Spigots (Low Profile)

Single central hidden fixing idea for narrow beams or slab installations
⊕ Duplex stainless steel 2205 spigot
⊕ Requires 1x Central M12 fixing and specially machined nut
⊕ Ideal for narrow/PFC beams and slab installations
⊕ No large core holes or domical covers required
⊕ 45mm front slimline profile x 65mm depth
⊕ Suits 12mm & 17.52mm Glass Panels
⊕ Friction fit glass installation with friction packer
⊕ 120mm Depth spigot mouth provides extra clamping strength and rigidity 

A contemporary clamp which acts as a brace between glass panels, providing extra rigidity to your fence.

All our clamps are made from Stainless Steel 316 and come in Polish, Satin or Matt Black finish.
Clamps are “Friction Fit” meaning that the glass panels do not require pre-drilled holes for fitting. 

Straight Clamps:

⊕ Suits 12mm Glass Panels
⊕ SML = Ideal for panels with gaps between 20-50mm
⊕ LGE = Ideal for panels with gaps between 20-95mm

90 Degree Clamps:

⊕ Suits 12mm Glass Panels
⊕ Bracing of glass panels at 90 degrees

Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to wall/posts
⊕ 2x Countersunk fixing holes to wall/post

Offset Wall Clamp:

⊕ Suits 12mm Glass Panels
⊕ Brace glass to walls/posts
⊕ Rotate for left or right side fixing
⊕ 1x Countersunk hole for fixing to wall/post

Swivel Clamp:

⊕ Suits 12mm Glass Panels
⊕ Multi angle clamp – a great solution for variable angle installs

Square Face/ Square Back Clamp:

⊕ Duplex Stainless Steel 2205
⊕ Suits 8mm, 10mm, 12mm Glass Panels
⊕ Supports glass panels with SQ Post / Wall

Because we have a range of different spigots and there are a range of different applications and locations you’ll be installing your ‘Frameless Glass Pool Fence’ there are a few different options you can choose from to install your spigots securely.

Cement Slabs / Tiles on concrete slab:
⊕ Base Plate Spigot = 4x M10 x 120mm – SS316 Threaded Rods (Chem Anchor)
⊕ Face-mount Spigot = 2x M12 x 120mm – SS316 fixing Threaded Rod (Chem Anchor)
⊕ Deluxe Top-mount Spigot = 1x M12 x 120mm – SS316 Threaded Rod (Chem Anchor)
⊕ Tilt Spigot = 1x M18 x 120mm – SS316 Threaded Rod (Chem Anchor)

Timber Installations (Part way through Beam/Joist):
⊕ Base Plate Spigot = 4x M10 x 110mm – SS316 Timber Lag Screws (Must have sufficient anchoring)
⊕ Face-mount Spigot = 2x M12 x (115mm or 160mm) – SS316 Lag Screws
⊕ Deluxe Top-mount Spigot = 1x M12 x (115mm or 160mm) – SS316 Lag Screws
⊕ Tilt Spigot = 2x M12 x 93mm – SS316 Lag Screw Kit

Timber Installations (All the way through Beam/Joist):
⊕ Base Plate Spigot = 4x M10 SS316 Threaded Rod (Cut to size onsite) (Must have sufficient anchoring)
⊕ Face-mount Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Deluxe Top-mount Spigot = 1x M12 SS316 Threaded Rod (Cut to size onsite)
⊕ Tilt Spigot = 2x M12 SS316 Threaded Rod (Cut to size onsite)