We are calculating your project costs...
XPS Fence Layout
Enter your fence configuration
Describes the maximum height of the fence posts from ground level to the top of the post. The first slat starts 8mm lower.
Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.
0 mm Slat Spacing means 100% privacy
XPS Fence Calculations
Enter the dimensions required below
Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.
Describes the height of the top slat from ground level.
IF, the bottom gap is too big, adjust fence height or try different slat spacing.
Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.
Describes the height of the top slat from ground level.
IF, the bottom gap is too big, adjust fence height or try different slat spacing.
Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides in windy areas.
Describes the height of the top slat from ground level.
IF, the bottom gap is too big, adjust fence height or try different slat spacing.
Choose Your Slat Fence Situation
Choose one of the below scenarios to start planning your Aluminium Slat Screening Fence
Quick to install screening / privacy fence. Best on level ground. Ideal for car ports, bin areas, to section off areas and create privacy.
Ideal as infill between existing brick wall structures. All slats pre-cut and easy to DIY. Just assemble and attach.
SFS Fence Layout
How many fence sections are you planning?
A new section has different dimensions to the previous section. Same sized sections are accounted for by entering the amount of same sized panels.
Enter Width & Height and Quantity for each unique section.
Describes the maximum height of the fence posts from ground level to the top of the post. The first slat starts 8mm lower.
Simply enter the full width between your walls or posts. We allow automatically for necessary gap spacings.
Use this field to define the number of sections in your fence project that have the same height and width
Enter General Fence Details
0 mm Slat Spacing means 100% privacy. The most common spacing is 9mm. For additional privacy without fully closing off the section, 5mm is recommended.
Choose from 2 different width for our slats. 65mm is the standard width, looking the best. 90mm is often used to match the look of existing fence sections made from wood.
Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.
Enter absolute width between your 2 walls. We account for posts, hinges, latches etc.
Enter the absolute height of the wall the gate will be attached to. If the terrain is on a slope, use the shorter measurement.
Space between bottom of gate to ground. Choose according to preference and environment. If small rocks are near or pets have to pass underneath, adjust accordingly.
SFS Fence Calculations
Enter further details below so we can provide you with an accurate estimate
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
QQES Fence Layout
How many different fence sections do you have?
A new section is when any of the following parameters change:
- Height of Fence from one section to another
- Slope of terrain changes from level to sloped
- Direction of Fence changes by 90º or at a custom angle
Enter the total width of this section; measure from corner to corner. We automatically include all necessary gaps and allowances for posts, frames and slats.
Describes the maximum height of the fence; the highest point is the fence post, around 8mm above the top slat.
Means angle between sections is different to 90º or 180º
0 mm Slat Spacing means 100% privacy. The most common spacing is 9mm. For additional privacy without fully closing off the section, 5mm is recommended.
Choose from 2 different width for our slats. 65mm is the standard width, looking the best. 90mm is often used to match the look of existing fence sections made from wood.
Describes the minimum space between ground level and the bottom of the first slat. Can be defined if roots or other obstructions are present. Otherwise, the gap will be minimised.
QES Fence Calculations
Enter further details below so we can provide you with an accurate estimate
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
For calculations
Including top and bottom caps. Total height of side frame channel
Visible Slat Width between Frames
QES Contact Form
The QES System is necessary when working on sloped terrain.
Otherwise, we recommend working with XPS or SFS.
Please provide us with basic measurements for your project and leave us your details below.
One of our fence experts will reach out to you at your convenient time.
XPS Colour Selection
please select your color of choice
Project Overview
Enter further details below so we can provide you with an accurate estimate
Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides.
Some fence posts can be replaced with support rails. This means less work and less posts. However, not recommended for longer fence sides.
SFS Colour Selection
please select your color of choice
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Includes Fence Slats + Gate Slats + Gate Blades
Final Step
The final estimated price is :
Are you installing yourself?
Where do you want us to send your detailed quote?
G'day
We respect your privacy! We don't share your contact details with any third parties! We don't send any generic marketing! We may give you a courtesy call, or email. Just to make sure all questions are answered and your DIY Fence becomes an easy success! You can opt out any time! This is our professional promise.
Recommendations & Feedback
Summary
| Description | Information | Quantity | Price |
|---|---|---|---|
| Discount : | |||
| Total : | |||