Everything Brisbane pool owners need to know about compliant pool barriers: heights, gates, non-climbable zones and inspection requirements.
Applies statewide in QLD | AS 1926.1–2007 (QLD modified) | Updated 2026
Any pool capable of holding more than 300mm of water is a regulated pool under Queensland law and must have a compliant safety barrier. This applies to in-ground, above-ground, indoor, portable and inflatable pools.
At least 1,200mm from finished ground level to the top of the barrier at every point along its length. Boundary fences used as pool barriers are typically 1,800mm.
No more than 100mm between the bottom of the fence and the ground. Any gap larger than this must be fixed before an inspection.
Gaps between vertical members must not exceed 100mm. If horizontal rails are on the outside, there must be at least one gap of 900mm between them; otherwise rails go on the inside with vertical gaps no more than 10mm.
For fences under 1,800mm: climbable objects must be kept at least 900mm away on the outside and 300mm on the inside (where verticals exceed 10mm). For fences 1,800mm or taller, the 900mm NCZ may be measured from the top on the inside.
The barrier must be permanent and kept in good structural condition. Any movement, bending or deterioration that increases gaps must be repaired immediately.
Pool gates must swing outward, away from the pool area, never inward.
Gates must close and latch automatically from every position without any assistance. Hinges and latches must be in excellent working condition with no friction or obstruction.
Latches must be at least 1,500mm above finished ground level and at least 1,400mm above the highest lower horizontal rail. If these heights aren't met, the latch must be positioned on the inside of the gate so a child cannot reach it.
You must have a designated access point (such as a ladder for above-ground pools) and it must be surrounded by a permanent fence and gate that meets the standard.
For homes built after 1992, doors and windows cannot open directly into the pool area. If they do, compliant screens or safety limiters must be fitted.
Balconies and raised decks near the pool area must be assessed to ensure they cannot be used as a climbing point to access the pool enclosure.
A compliant CPR sign must be clearly visible near the pool. It must be weatherproof and display current resuscitation instructions.
All regulated pools in Queensland must be registered with your local council. You must also arrange a licensed pool safety inspector check when selling or leasing your property.
Browse our fully compliant DIY pool fencing panels: flat top, glass, perforated and more.
It is easy to SITE MEASURE, PLAN, ORDER & INSTALL your DIY Fence.
Simply follow our step by step Site Measure Guide below to work out everything you need.
Have Questions?
Feel free to reach out via Messenger, Email or call our fencing experts directly.
For all orders we deliver direct to site for your convenience.
Please ensure there is a clear designated set down area on site.
If you have specific delivery instructions and details please ensure you add the details to the Order Notes during checkout.
Collection of Orders from our depot is available. Please allow 24hrs to process your order, pick and pack your products ready for collection. We send you an email with all details once it is ready.
For urgent orders please call us to see how we can help you. However, we cannot guarantee it will be possible every time but will do our best to facilitate urgent orders. Thank you for your understanding.
Orders are typically processed and delivered within 3 – 5 business days*
Order Confirmations: We provide order confirmations via text as soon as your order is packed and ready for delivery.
*stock permitting, for large orders time-frame may change and if so, we will contact you.
Yes – our aluminium fencing systems are engineered for DIY. No licence required for non-structural fencing in QLD. Most installs take a weekend with basic tools. We provide step-by-step guides and live support throughout your install via phone and chat.
For like-for-like replacement of an existing pool barrier, a building approval is generally not required – provided the new fence meets current QLD standards (minimum 1200mm, AS 1926.1 compliant). New pools or layout changes may require council approval. All our pool fencing is compliant.
We deliver across South East Queensland – Brisbane, Gold Coast, Sunshine Coast, Ipswich, Logan, Redlands, Caboolture and surrounds. With four QLD warehouses (Virginia, Molendinar, Meadowbrook, Yatala), most orders arrive within 3–5 business days. Pickup also available.
Find the same product cheaper at Bunnings, Mitre10, or Stratco? We'll beat it by 5% (up to $250 per item). Our everyday prices are already 20–50% below retail – we sell at trade and wholesale pricing direct from our warehouse, with no middleman markup.
