Call Us
0480 016 687
$0.00 0

Cart

No products in the cart.

Have Questions?

Contact

Reach out to our team of industry experts who are active and ready to take your questions, simply reach out and get in touch by selecting one of the options below: 

Email Us

[email protected]

Live Message

Click To Open The Chat

Call Us

04800 166 87

Pool Fencing – QLD Regulations

In Queensland, all pool barriers must be a minimum of 1200mm high measured from the finished ground level on the outside of the barrier. This applies to all new pools and any pool barrier that has been modified or replaced. The requirement is set under the Building Act 1975 and the Queensland Development Code.

For our flat top pool fencing, the standard 1200mm panel height is specifically designed to meet this requirement. Our panels are pre-cut to QLD-compliant heights so you don't need to guess.

Yes – all pool barriers in Queensland must comply with AS 1926.1-2012 (Safety barriers for swimming pools). This applies whether you hire a professional or install it yourself.

Key requirements under AS 1926.1 include:

  • Minimum 1200mm barrier height
  • Non-climbable zone (NCZ) of 900mm on the outside of the barrier — no footholds, horizontal rails, or objects within this zone
  • Gate must open away from the pool and be self-closing and self-latching
  • Gate latch must be positioned at least 1500mm from the ground, or be child-resistant if lower
  • Maximum gap at the bottom of the fence: 100mm
  • Maximum gap between vertical infills: 100mm

All products we supply are designed to meet these standards. If you're unsure, our team can walk you through compliance before you order.

Replacing a like-for-like pool barrier generally does not require a building approval in Brisbane, provided the new fence complies with current Queensland pool barrier standards.

However, you may need a building approval if:

  • You are installing a fence for a new pool
  • You are significantly altering the barrier layout or pool safety area
  • Your pool was built before 1 October 2010 and is being transferred to a new owner

We always recommend checking with your local council before starting work, as requirements can vary depending on when your pool was constructed. A licensed pool safety inspector can also advise you.

Yes. In Queensland, all pool barriers must be inspected and certified by a licensed pool safety inspector. This is required:

  • When a pool is registered for the first time
  • When a property with a pool is sold or leased
  • After a pool barrier fails an inspection and has been rectified

You can find a licensed pool safety inspector at the Queensland Building and Construction Commission (QBCC) website. Once your DIY fencing is installed, book an inspection to receive your pool safety certificate. Our fencing is designed to pass these inspections when installed correctly per the instructions provided.

Product & Installation

Frameless glass fencing uses thick toughened glass panels (typically 12mm) mounted directly into spigots drilled into the ground or fixed to a structural surface. There are no vertical posts between panels – the glass itself provides all structural support. The result is an unobstructed, premium look with maximum visibility. Ideal for pools where the view is the feature.

Semi-frameless glass fencing uses thinner glass panels (typically 8–10mm) supported by aluminium posts spaced every 1.2–1.5m. The posts are visible but slim and the glass panels sit between them. It's a more affordable option than fully frameless and still delivers a clean, open aesthetic.

Both options comply with QLD pool barrier requirements when installed correctly.

This depends on the design. Standard horizontal slat fencing cannot be used as a pool barrier because horizontal rails create a climbable surface – violating the non-climbable zone (NCZ) requirements of AS 1926.1.

Vertical slat panels can be used as pool fencing if they meet the following requirements:

  • Minimum 1200mm height
  • Maximum 100mm gap between vertical slats
  • No horizontal rails within 900mm of the outside of the fence (NCZ)
  • Compliant self-closing, self-latching gate

If you're planning to use slat fencing around a pool area, contact our team and we can confirm which products are suitable.

Yes – most installs take a weekend

Our aluminium flat top and slat fencing systems are designed specifically for DIY installation. You don't need a trades licence to install non-structural fencing in Queensland.

Typical tools required:

  • Post hole digger or concrete drill
  • Spirit level
  • Tape measure and string line
  • Basic hand tools (screwdriver, spanner)
  • Concrete mix (for setting posts)

We provide step-by-step installation guides and our team offers live support via phone and chat throughout your install. Use our Fence Planner to calculate exactly what you need before you order.

The easiest way is to use our online Fence Planner – it calculates panels, posts and fixings based on your measurements and produces a full materials list and cost estimate.

For a basic manual measure:

  • Measure the total linear metres of fence run you need to cover
  • Note any gate openings and their widths
  • Identify any changes in direction (corners)
  • Measure any level changes or slopes along the fence line

If you're unsure, our team can review your measurements before you order. We'd rather spend 10 minutes helping you get it right than have you order too much or too little.

Ordering, Delivery & Pickup

We deliver across South East Queensland, including Brisbane, Gold Coast, Sunshine Coast, Ipswich, Logan, Redlands, Caboolture and surrounding areas. Our warehouse network – with locations at Virginia, Molendinar, Meadowbrook and Yatala – means most SEQ deliveries are completed within 3–5 business days.

Delivery is direct to your site. Just make sure there's a clear, accessible set-down area and add any specific delivery instructions to your order notes at checkout. For regional or remote QLD, contact us before ordering to confirm delivery options and lead times.

Yes – depot pickup is available from our QLD warehouse locations. We ask that you allow 24 hours for us to process, pick and pack your order. Once it's ready, we'll send you an email with pickup details.

Our warehouse locations are:

  • Virginia 4014 (Brisbane north)
  • Molendinar 4214 (Gold Coast)
  • Meadowbrook 4131 (Logan)
  • Yatala 4207 (limited range)

For urgent pickups, please call us directly – we'll do our best to accommodate, though we can't always guarantee same-day availability.

Standard orders are typically processed and delivered within 3–5 business days across South East Queensland. Once your order is packed and ready, you'll receive an order confirmation via text.

For large orders, lead times may be longer – we'll contact you if that's the case. If you have a tight deadline, call us before ordering and we'll let you know what's achievable.

Pricing & The Price Beat Guarantee

We offer a 5% price beat on equivalent products from major retailers including Bunnings, Mitre10 and Stratco – up to a value of $250 per item.

To claim it, simply show us a current advertised price for the same or equivalent product and we'll beat it by 5%. The product must be the same specification (material, height, finish, profile) and be currently in stock at the competitor.

Our everyday pricing is already 20–50% below typical retail for most products, so in many cases you won't need to use the guarantee – but it's there if you find a better price.

We sell direct from our warehouse at trade and wholesale pricing – we cut out the retail markup. Hardware stores carry fencing as one of hundreds of product categories; fencing is our only focus.

Because we buy in bulk and hold significant local stock, we can pass those savings on directly to homeowners and tradies without any minimum order requirements.

Tips &

Questions

Online Ordering

It is easy to SITE MEASURE, PLAN, ORDER & INSTALL your DIY Fence.
Simply follow our step by step Site Measure Guide below to work out everything you need.

Have Questions?
Feel free to reach out via Messenger, Email or call our fencing experts directly.

For all orders we deliver direct to site for your convenience.

Please ensure there is a clear designated set down area on site. 

If you have specific delivery instructions and details please ensure you add the details to the Order Notes during checkout.

Collection of Orders from our depot is available. Please allow 24hrs to process your order, pick and pack your products ready for collection. We send you an email with all details once it is ready. 

For urgent orders please call us to see how we can help you. However, we cannot guarantee it will be possible every time but will do our best to facilitate urgent orders. Thank you for your understanding. 

Orders are typically processed and delivered within 3 – 5 business days*


Order Confirmations: We provide order confirmations via text as soon as your order is packed and ready for delivery.

*stock permitting, for large orders time-frame may change and if so, we will contact you.

Common Questions: Everything You Need To Know Before You Order

Yes – our aluminium fencing systems are engineered for DIY. No licence required for non-structural fencing in QLD. Most installs take a weekend with basic tools. We provide step-by-step guides and live support throughout your install via phone and chat.

For like-for-like replacement of an existing pool barrier, a building approval is generally not required – provided the new fence meets current QLD standards (minimum 1200mm, AS 1926.1 compliant). New pools or layout changes may require council approval. All our pool fencing is compliant.

We deliver across South East Queensland – Brisbane, Gold Coast, Sunshine Coast, Ipswich, Logan, Redlands, Caboolture and surrounds. With four QLD warehouses (Virginia, Molendinar, Meadowbrook, Yatala), most orders arrive within 3–5 business days. Pickup also available.

Find the same product cheaper at Bunnings, Mitre10, or Stratco? We'll beat it by 5% (up to $250 per item). Our everyday prices are already 20–50% below retail – we sell at trade and wholesale pricing direct from our warehouse, with no middleman markup.

Rated 4.9/5 by 860+ Happy Customers

Need A Hand?
Get In Touch

Supported by local professionals
Fencing Suppliers Australia
Visit Us
Stay up to date with our latest news, receive exclusive deals, and more.
Phone Support
Monday – Friday
09:00 am – 04:00 pm
Saturday – Sunday – Closed
Locations
Mail Address / Office:
P.O. Box 2148
Wangara DC 6947
QLD Warehouses:
Virginia 4014
Molendinar 4214
Meadowbrook 4131
Yatala 4207 (limited range)
© Fencing Suppliers Australia
2024